4P10 Hydroponic Tower Systems: The Most Efficient Planting and Nutrient Delivery System

The 4P10 hydroponic tower system launched by our Lyine Group is a combination. The combination of 4 tower systems is very suitable for indoor or project use. Let’s take a look at the characteristics of the 4P10 hydroponic tower system.

Planting quantity

The 4P10 hydroponic tower system has 4 planting holes in each layer, and a tower system has 10 layers, that is to say, a tower system can grow 40 vegetables, and a combined tower system of 4 can grow about 160 vegetables.

Component

The 4P10 hydroponic tower system is composed of 4 tower systems, dosers and waterways.

The 4 tower systems are about 2 meters high, and the waterway connects the dosing device and the tower system. There are two buckets of nutrient solution under the dosing device. When the vegetables need nutrients, the dosing device can automatically sense and deliver nutrients through the waterway, so that the vegetables grow healthily.

This is one of the advantages of the 4P10 hydroponic tower system.

What vegetables can be grown?

The 4P10 hydroponic tower system can grow most green leafy vegetables, such as lettuce, red amaranth, arugula, and kale. In addition, it can also grow small tomatoes and cucumbers, and the growth cycle is very short.

So what does a 4P10 tower system look like without growing hydroponic vegetables? As you can see in the picture below, the tower system is very tall, like bamboo, so after you have it installed, it basically looks like this.

You don't have to worry about the installation of the 4P10 tower system, because its installation is very simple. It is not very complicated to stack up the columns one by one, and then connect the waterway and the dosing device. Even if you are a novice, you can fully grasp it . It's easy to assemble if you're an experienced hydroponic.

If you are interested in our 4P10 tower system, you can leave a form on our website, and we will answer you in detail.